In this section
The MIM Lab develops robotic and mechatronics surgical systems for a variety of procedures.
Twitter/X: @MIMLab_Robotics
Youtube: Mechatronics in Medicine Lab
The Mechatronics in Medicine Laboratory develops robotic and mechatronics surgical systems for a variety of procedures including neuro, cardiovascular, orthopaedic surgeries, and colonoscopies. Examples include bio-inspired catheters that can navigate along complex paths within the brain (such as EDEN2020), soft robots to explore endoluminal anatomies (such as the colon), and virtual reality solutions to support surgeons during knee replacement surgeries.
...
......
Mr Ayhan Aktas
Casual - Student demonstrator - lower rate
Dr Daniel Bautista Salinas
Research Associate
Dr Kaiwen Chen
Research Associate
Mr Zejian Cui
Research Postgraduate
Mr Connor Daly
Research Postgraduate
Emeritus Professor Brian L Davies FREng
Emeritus Professor
Mr Zhaoyang Jacopo Hu
Research Postgraduate
Dr Hisham M Iqbal
Research Associate
Mr Alex Ranne
Research Postgraduate
Professor Ferdinando M Rodriguez y Baena
Co-Director of Hamlyn Centre, Professor of Medical Robotics
Dr Jialei Shi
Research Associate
Mr Spyridon Souipas
Casual - Other work
Ms Emilia Zari
Research Postgraduate
@article{Garriga:2018:10.1177/0278364917746222,
author = {Garriga, Casanovas A and Rodriguez, y Baena F},
doi = {10.1177/0278364917746222},
journal = {International Journal of Robotics Research},
pages = {197--222},
title = {Complete follow-the-leader kinematics using concentric tube robots},
url = {http://dx.doi.org/10.1177/0278364917746222},
volume = {37},
year = {2018}
}
TY - JOUR
AB - Concentric tube robots offer the capability of follow-the-leader motion, which is desirable when navigating in cluttered environments, such as in minimally invasive surgery or in-situ inspections. The follow-the-leader capabilities identified in the existing literature, however, are limited to trajectories with piecewise constant-curvature segments or piecewise helical segments. A complete study of follow-the-leader kinematics is, therefore, relevant to determine the full potential of these robots, and clarify an open question. In this paper, a general analysis of follow-the-leader motion is presented, and a closed-form solution to the complete set of trajectories where follow-the-leader is possible under the assumption of no axial torsion of the tubes composing the robot is derived. For designs with constant-stiffness tubes, the precurvatures required are found to be either circumference arcs, helices, or deformed helices with exponentially varying curvature magnitude. The analysis developed also elucidates additional motions of interest, such as the combination of follow-the-leader motion in a robot segment with general maneuvers in another part. To determine the applicability of the assumption regarding the tubes’ torsion, the general equilibrium of the robot designs of interest is considered, and a closed-form solution to torsion in two-tube robots with helical precurvatures is derived. Criteria to select a desired torsional behavior are then extracted. This enables one to identify stable trajectories where follow-the-leader is possible, for potential application to minimally invasive surgery. An illustrative case study involving simulation and experiment is conceived using one of these trajectories, and the results are reported, showcasing the research.
AU - Garriga,Casanovas A
AU - Rodriguez,y Baena F
DO - 10.1177/0278364917746222
EP - 222
PY - 2018///
SN - 0278-3649
SP - 197
TI - Complete follow-the-leader kinematics using concentric tube robots
T2 - International Journal of Robotics Research
UR - http://dx.doi.org/10.1177/0278364917746222
UR - https://journals.sagepub.com/doi/10.1177/0278364917746222
UR - http://hdl.handle.net/10044/1/53684
VL - 37
ER -
General enquiries
hamlyn@imperial.ac.uk
Facility enquiries
hamlyn.facility@imperial.ac.uk
The Hamlyn Centre
Bessemer Building
South Kensington Campus
Imperial College
London, SW7 2AZ
Map location
