In this section
The MIM Lab develops robotic and mechatronics surgical systems for a variety of procedures.
Twitter/X: @MIMLab_Robotics
Youtube: Mechatronics in Medicine Lab
The Mechatronics in Medicine Laboratory develops robotic and mechatronics surgical systems for a variety of procedures including neuro, cardiovascular, orthopaedic surgeries, and colonoscopies. Examples include bio-inspired catheters that can navigate along complex paths within the brain (such as EDEN2020), soft robots to explore endoluminal anatomies (such as the colon), and virtual reality solutions to support surgeons during knee replacement surgeries.
...
......
Mr Ayhan Aktas
Casual - Student demonstrator - lower rate
Dr Daniel Bautista Salinas
Research Associate
Dr Kaiwen Chen
Research Associate
Mr Zejian Cui
Research Postgraduate
Mr Connor Daly
Research Postgraduate
Emeritus Professor Brian L Davies FREng
Emeritus Professor
Mr Zhaoyang Jacopo Hu
Research Postgraduate
Dr Hisham M Iqbal
Research Associate
Mr Alex Ranne
Research Postgraduate
Professor Ferdinando M Rodriguez y Baena
Co-Director of Hamlyn Centre, Professor of Medical Robotics
Dr Jialei Shi
Research Associate
Mr Spyridon Souipas
Casual - Other work
Ms Emilia Zari
Research Postgraduate
@article{Iranpour:2010,
author = {Iranpour, F and Merican, AM and Rodriguez, y Baena F and Cobb, JP and Amis, AA},
journal = {J Orthop Res},
pages = {589--594},
title = {Patellofemoral Joint Kinematics: The Circular Path of the Patella around the Trochlear Axis},
volume = {28},
year = {2010}
}
TY - JOUR
AB - Differing descriptions of patellar motion relative to the femur have resulted from previous studies. We hypothesized that patellar kinematics would correlate to the trochlear geometry and that differing descriptions could be reconciled by accounting for differing alignments of measurement axes. Seven normal fresh-frozen knees were CT scanned, and their kinematics with quadriceps loading was measured by an optical tracker system. Kinematics was calculated in relation to the femoral epicondylar, anatomic, and mechanical axes. A novel trochlear axis was defined, between the centers of spheres best fitted to the medial and lateral trochlear articular surfaces. The path of the center of the patella was circular and uniplanar (root-mean-square error 0.3 mm) above 16 +/- 3 degrees (mean +/- SD) knee flexion. In the coronal plane, this circle was aligned 6 +/- 2 degrees from the femoral anatomical axis, close to the mechanical axis alignment. It was 91 +/- 3 degrees from the epicondylar axis, and 88 +/- 3 degrees from the trochlear axis. In the transverse plane it was 91 +/- 3 degrees and 88 +/- 3 degrees from the epicondylar and trochlear axes, respectively. Manipulation of the data to different axis alignments showed that differing previously published data could be reconciled. The circular path of patellar motion around the trochlea, aligned with the mechanical axis of the leg, is easily visualized and understood. (C) 2009 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 28:589-594, 2010
AU - Iranpour,F
AU - Merican,AM
AU - Rodriguez,y Baena F
AU - Cobb,JP
AU - Amis,AA
EP - 594
PY - 2010///
SN - 0736-0266
SP - 589
TI - Patellofemoral Joint Kinematics: The Circular Path of the Patella around the Trochlear Axis
T2 - J Orthop Res
VL - 28
ER -
General enquiries
hamlyn@imperial.ac.uk
Facility enquiries
hamlyn.facility@imperial.ac.uk
The Hamlyn Centre
Bessemer Building
South Kensington Campus
Imperial College
London, SW7 2AZ
Map location
