In this section
The MIM Lab develops robotic and mechatronics surgical systems for a variety of procedures.
Twitter/X: @MIMLab_Robotics
Youtube: Mechatronics in Medicine Lab
The Mechatronics in Medicine Laboratory develops robotic and mechatronics surgical systems for a variety of procedures including neuro, cardiovascular, orthopaedic surgeries, and colonoscopies. Examples include bio-inspired catheters that can navigate along complex paths within the brain (such as EDEN2020), soft robots to explore endoluminal anatomies (such as the colon), and virtual reality solutions to support surgeons during knee replacement surgeries.
...
......
Mr Ayhan Aktas
Casual - Student demonstrator - lower rate
Dr Daniel Bautista Salinas
Research Associate
Dr Kaiwen Chen
Research Associate
Mr Zejian Cui
Research Postgraduate
Mr Connor Daly
Research Postgraduate
Emeritus Professor Brian L Davies FREng
Emeritus Professor
Mr Zhaoyang Jacopo Hu
Research Postgraduate
Dr Hisham M Iqbal
Research Associate
Mr Alex Ranne
Research Postgraduate
Professor Ferdinando M Rodriguez y Baena
Co-Director of Hamlyn Centre, Professor of Medical Robotics
Dr Jialei Shi
Research Associate
Mr Spyridon Souipas
Casual - Other work
Ms Emilia Zari
Research Postgraduate
@article{Garriga:2019:10.1115/1.4041739,
author = {Garriga, Casanovas A and Rodriguez, y Baena F},
doi = {10.1115/1.4041739},
journal = {Journal of Mechanisms and Robotics},
title = {Kinematics of continuum robots with constant curvature bending and extension capabilities},
url = {http://dx.doi.org/10.1115/1.4041739},
volume = {11},
year = {2019}
}
TY - JOUR
AB - Continuum robots are becoming increasingly popular due to the capabilities they offer, especially when operating in cluttered environments, where their dexterity, maneuverability, and compliance represent a significant advantage. The subset of continuum robots that also belong to the soft robots category has seen rapid development in recent years, showing great promise. However, despite the significant attention received by these devices, various aspects of their kinematics remain unresolved, limiting their adoption and obscuring their potential. In this paper, the kinematics of continuum robots with the ability to bend and extend are studied, and analytical, closed-form solutions to both the direct and inverse kinematics are presented. The results obtained expose the redundancies of these devices, which are subsequently explored. The solution to the inverse kinematics derived here is shown to provide an analytical, closed-form expression describing the curve associated with these redundancies, which is also presented and analyzed. A condition on the reachable end-effector poses for robots with six actuation degrees-of-freedom (DOFs) is then distilled. The kinematics of robot layouts with over six actuation DOFs are subsequently considered. Finally, simulated results of the inverse kinematics are provided, verifying the study.
AU - Garriga,Casanovas A
AU - Rodriguez,y Baena F
DO - 10.1115/1.4041739
PY - 2019///
SN - 1942-4302
TI - Kinematics of continuum robots with constant curvature bending and extension capabilities
T2 - Journal of Mechanisms and Robotics
UR - http://dx.doi.org/10.1115/1.4041739
UR - http://hdl.handle.net/10044/1/62810
VL - 11
ER -
General enquiries
hamlyn@imperial.ac.uk
Facility enquiries
hamlyn.facility@imperial.ac.uk
The Hamlyn Centre
Bessemer Building
South Kensington Campus
Imperial College
London, SW7 2AZ
Map location
