Dame Julia Higgins Postdoc Collaborative Research Fund
Building on the success of the previous Engineering Postdoc Collaborative Research funding rounds, the Faculty of Engineering Research Committee and six Faculty of Medicine Departments are delighted to announce a joint funding opportunity for postdocs.
All postdocs from the Faculty of Engineering are eligible, in addition to postdocs from the following Faculty of Medicine departments:
- Brain Sciences
- Institute of Clinical Sciences
- Infectious Diseases
- Immunology and Inflamation
- Metabolism, Digestion and Reproduction
- NHLI
- School of Public Health
- Surgery and Cancer
The 2024 call is now open.
This fund was introduced to give postdocs at the Faculty of Engineering and Faculty of Medicine the opportunity to apply for and be awarded their own research funding, develop and deliver a collaborative research project, and take a step towards becoming independent from the research of their PI.
The fund promotes collaboration between postdocs in the Faculties of Engineering and Medicine, whereby funding applications submitted must involve a minimum of two postdocs from different departments. The postdocs taking part can be from any department within Engineering or Medicine. Unfortunately, postdocs from departments not specified above cannot take part in this funding call. To facilitate the interaction between the departments, networking events precede the proposal deadline.
To register your interest please complete the initial expression of interest form.
Timeline:
- Deadline for initial expression of interest/registration: 12.00 noon on Friday 6 September 2024
- Networking events: taking place on 10 and 16 September 2024
- Application deadline: 12.00 noon on Monday 30 September 2024
- Assessment panel: early October 2024
- Successful applicants will be notified the week in early October 2024
- All spending and final reports are due by 31 July 2025
For further information, please contact Anna Seabourne:
The Faculty of Engineering and Medicine proposals that have been funded in previous years:
Eng and med
2023
POLAR: Prosthetics & Orthopaedics for Limited Access Regions
Joshua Brown Surgery and Cancer, Angus Clark Bioengineering, Bukeikhan Omarali Computing
A Wearable Physiological Sensor System for Assessing Food and Energy Intake
Mingzhu Cai MDR, Mayue Shi Mechanical Engineering
An open-source testing kit for emulating the neural processing of tactile stimuli
Dorian Florescu EEE, Danielle Kurtin Brain Sciences, Zhenhua Yu Mechanical Engineering
Artificial intelligence-facilitated interpretation of next-generation ultrasound images
Pasha Grachev MDR, Sibo Cheng Computing
Allocating vital things via Internet of Things: real-time rapid needs assessment for disaster relief allocation in Sub-Saharan Africa
Ben Howard Civil and Environmental Engineering, Ferdinand Grimm Mechanical Engineering
Advancing ultrasonic characterisation of volumetric microstructure for alloys
Ming Huang Mechanical Engineering, Ruiqiang Zhang Mechanical Engineering, Zachary Kloenne Materials
Battlefront to Homefront: Using AI to Forecast Musculoskeletal Health of UK military servicemen
Balasundaram Kadirvelu Computing, Fraje Watson Bioengineering, Fabio Santos Ferreira Computing
Using Wilson Cowan Models to identify optimal parameters for Temporal Interference (TI) stimulation of the human hippocampus to modulate brain-behaviour relationships
Danielle Kurtin Brain Sciences, Dorian Florescu EEE
Wearable Urine Volume Measuring Device Designed for Non-Invasive and Easy-Access Bladder Function Monitoring
Xiaotong Li Earth Science and Engineering, Mayue Shi Mechanical Engineering, Mengyun Qiao Brain Sciences, Zhenhua Yu Mechanical Engineering
Exosome engineering for precise targeting and repair of ischaemic blood vessels
Sinziana Popescu NHLI, Andre Ohara Chemical Engineering
Machine Learning for hypothesis generation in multimodal physical and psychosocial healthcare data: a proof-of-concept study
Fraje Watson Bioengineering, Fabio Santos Ferreira Computing, Balasundaram Kadirvelu Computing
Artificial intelligence (AI)-based smart hot stamping for lightweighting of transportation vehicles
Ruiqiang Zhang Mechanical Engineering, Hamid Reza Attar Dyson
Enhancing Green Hydrogen Production via Sonification
Yifeng Zhang Mechanical Engineering, Mengzheng Ouyang Earth Science and Engineering, Cheng Ouyang Institute of Clinical Sciences
2022
Engineering Leads
Evaluation of hydrogen embrittlement during manufacturing and lifetime of Ni mat electrocatalyst
Livia Cupertino Malheiros (Civil and Environmental Engineering), Mengzheng Ouyang (Earth Science and Engineering).
Highly stable organic and perovskite photoelectrodes for water splitting using electrospun conductive nanofiber network
Matyas Daboczi (Chemical Engineering), Mengzheng Ouyang (Earth Science and Engineering), Catalina Pino-Munoz (Earth Science and Engineering), Gurpreet Singh (Materials).
Novel design of metal-ceramic joints using additive manufacturing
Rohit Malik (Materials), Reece Oosterbeek (Mechanical Engineering), Alfredo Fantetti (Mechanical Engineering).
Electric conductive cement-based composites by co-electrospinning-electrospraying for energy storage
Mengzheng Ouyang (Earth Science and Engineering), Marcus Yio (Civil and Environmental Engineering)
Closed-loop predation to uncover the neural mechanisms of sensorimotor prediction in insects
Jack Supple (Bioengineering), Dorian Florescu (Electrical and Electronic Engineering), Mark Runciman (Surgery & Cancer), Alexandra M Yarger (Bioengineering).
Development of novel high-performance cathodes for CO2 reduction
Tian Tian (Chemical Engineering), Mengzheng Ouyang (Earth Sciences and Engineering).
From the atom to the structure: understanding hydrogen-microstructure interactions in new 3D printed metals to reshape the energy landscape
Alfredo Zafra (Civil and Environmental Engineering), Abigail Ackerman (Materials).
Medicine Leads
Leaky gut syndrome: a non-invasive mapping of gut permeability
Jacob Broughton-Venner (MDR), Kai Riemer (Bioengineering).
Soft Growing Robot for Ovarian Cancer Detection
Mark Runciman (Surgery & Cancer), Shen Treratanakulchai (Mechanical Engineering).
AI-assisted single pixel imaging of fast-moving cells
Yuchen Xiang (MDR), Sibo Cheng (Computing), Chen Chen (Computing)
Designing ATR Kinase peptide-based inhibitors as novel chemotherapeutics
Luke Yates (Infectious Diseases), Othman Almusaimi (Chemical Engineering) Richard Kelwick (Infectious Diseases), Mingxia Guo (Chemical Engineering).
SCANS - microneedleS to reduCe misdiAgnosis of skiN diSease
Maria Bernarda Zamora Talaya (Surgery & Cancer), Patrick Kierkegaard (Surgery & Cancer), Isobel Steer (Bioengineering).
2021
Delivering cell penetrating peptides non-invasively into the brain to target glial-related brain diseases
Dr Othman Al Musaimi - Chemical Engineering; Dr Sophie Morse – Bioengineering
GelPen: A Handheld Bioink Printer Using Microfluidic Mixing
Dr Nicola Contessi Negrini – Bioengineering; Dr Muhsincan Sesen - Bioengineering; Dr Dominic Wales - Electrical and Electronic Engineering
Self-righting: from Insect to Robot
Dr Samuel Fabian – Bioengineering; Dr Maria Kaimaki – Bioengineering; Dr Simon Smith-Bize - Computing
Microneedle-Based Wearable Device for Continual Glucose Monitoring in Interstitial Fluid
Dr Yubing Hu - Chemical Engineering; Dr Yasin Cotur - Bioengineering; Dr Pavani Cherukupally - Chemical Engineering
Novel formulations delivered by focused ultrasound to treat Alzheimer’s disease
Dr Sophie Morse – Bioengineering; Dr Talia Shmool – Chemical Engineering
Soft Metamaterial Wearable Sensors to Measure the Foot Contact Forces During Walking
Dr Inigo Sanz-Pena – Mechanical Engineering; Dr Hang Xu - Materials
Understanding the pollution filtration properties of leaves using contrasting imaging and element mapping techniques
Dr Gloria Young – Materials; Dr Rebekah Moore – Earth Science and Engineering
Adaptive Multi-stable Metamaterials for Contour Recognition
Dr Hang Xu – Materials; Dr Zhixiang Chen - Electrical and Electronic Engineering
2019
Cartilage regeneration using electrical stimulation paired with conductive hydrogels
Dr Michael Bruyns-Haylett – Bioengineering, Dr Panagiotis Kassanos - Computing (Hamlyn Centre), Dr Meysam Keshavarz - Computing (Hamlyn Centre).
Development of Biorecognition-Element Implanted 3D printed Electrodes: Towards a Cervical Cancer Screening Test
Dr Robert Channon – Bioengineering, Dr Binbin Chen - Mechanical Engineering, Dr Xinhua Liu - Dyson School of Design Engineering
Biomechanics of ulceration in diabetic feet: a dynamic FEM-DEM approach
Dr Ado Farsi - Earth Science and Engineering, Dr Enrica Papi – Bioengineering
Metal 3D printed structures: evaluating the effect of residual stresses
Dr Nicolas Hadjipantelis - Civil & Environmental Engineering, Dr Ado Farsi - Earth Sciences and Engineering
Improving the reliability of low-cost brain monitoring systems for healthcare applications
Dr Syed Anas Imtiaz – EEE, Dr Hafiz Amin - Mechanical Engineering
Hollow core particles for non-invasive measurement of pressure
Dr Muhsincan Sesen – Bioengineering, Dr Wenqian Chen - Chemical Engineering, Dr Ado Farsi - Earth Science and Engineering
Hydrodynamic Sampling and Sensing of Nucleic Acids from Biofluids
Dr Sze-yin Tan - Chemical Engineering, Dr Robert Channon - Bioengineering
3D-printed bioadhesive hydrogel-based patches for regenerative healing of lung tears
Dr Dominic Wales - Computing (Hamlyn Centre), Dr Carmel Howe – Bioengineering, Dr Meysam Keshavarz - Computing (Hamlyn Centre)
Green suspension systems of road vehicles for improved ride comfort and fuel economy
Dr Min Yu - Mechanical Engineering, Dr Boli Chen – EEE, Dr Hailing Fu – Aeronautics
2018
MINI - Multiscale Investigation of Nucleate-boiling and Interfaces
Dr Mirco Magnini – Chemical, Dr Edward Smith- Mechanical, Dr Victor Voulgaropoulos - Chemical
Closed-Loop Antibiotic Dosing
Dr David Freeman – Bioengineering, Dr Sally Gowers – Bioengineering, Dr Pau Herrero – EEE
Democratizing access to water resources usage through a high-performance approach to efficient modelling using cloud-based custom hardware
Dr Matei Istoan – EEE, Dr Jimmy O’Keeffe – Civil, Dr James Davis – EEE, Dr Shane Fleming – Chemical
Development of low cost orthotic device for foot and ankle trauma patients in landmine affected countries
Dr Grigorios Grigoriadis – Bioengineering, Dr Chris Natt – Bioengineering, Dr Geoffrey Ng -Mechanical
Novel High-Performance Graphene Nanocomposites for Industrial CO2 Capture
Dr Diana Iruretagoyena – Chemical, Dr Debashis Puhan – Mechanical, Dr Sarah Hedberg –Chemical, Dr Di Zhang - Chemical
Feasibility study combining an activity-based urban transport model with air turbulence flow simulation to analyse the impact of traffic on air quality in London
Dr Koen H. van Dam – Chemical, Dr Dunhui Xiao - Earth Science and Engineering
Novel microphone array structures for high resolution spatial audio processing
Dr Alastair Moore – EEE, Dr Lluís Guasch - Earth Science and Engineering
High-accuracy ultra-sonic monitoring of corrosion on metallic substrates
Dr Franky Bedoya-Lora - Chemical, Dr Bo Lan – Mechanical
2017
Towards robot-assisted rehabilitation for Parkinson’s Disease
Dr Javier Andreu-Perez – Computing, Dr Enrico Franco – Mechanical, Dr Riccardo Secoli – Mechanical
Biocompatible electropolishing of additive manufactured titanium bone substitute
Dr Andrew Ballantyne – Materials, Dr Richard van Arkel – Mechanical
Extractability and mobility of pharmaceutical compounds from sewage sludge recycled to agricultural soil as a sustainable source of nutrients for crop growth
Dr Janice Kenney – ESE, Dr Jonathan Ritson – Civil & Environmental, Dr Hannah Rigby - Civil & Environmental
Additive manufacture of a spine surrogate for assessing injury risk during under vehicle explosions
Dr Nicolas Newell – Bioengineering, Dr Spencer Barnes – Mechanical, Dr Deborah Adkins – Dyson
A biomimetic approach to design green buildings based on thermoregulation and ventilation of termite mounds
Dr Kamaljit Singh – ESE, Dr Deborah Adkins – Dyson